System Power Rating |
: |
300 Watts (2 X 150 Stereo) |
|
Maximum SPL Output |
: |
124 dB peak system
output (pink noise) |
|
Net Weight of System |
: |
33 lbs. (19 lbs. for unit
with powered mixer,
14 lbs. for unit with
storage pod) |
|
System Type |
: |
Powered mixer with 2 two-way bass-reflex enclosures |
|
Frequency Range (-10 dB) |
: |
60 Hz - 20 kHz |
|
Frequency Response (±3 dB) |
: |
75 Hz - 19 kHz |
|
AC input |
: |
120 - 240 V 50/60 Hz, voltage selector switch sets operational range |
|
Amplifier Design |
: |
Crown® Class D |
|
Output Connector |
: |
2 X 1/4” TS (unbalanced) amplifier outputs |
|
Input Connectors |
: |
8 inputs (4 Mono Mic/Line, 2 X Stereo) |
|
Channels |
: |
1-4 are XLR / 1/4” jack combo connectors, XLR is a mic level input, 1/4” is a line level input. 5-6, one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack |
|
Input Impedance |
: |
Ch 1-4 Combo: XLR 3 K Ohms Balanced
Ch 1-4 Combo: TRS 20 K Ohms Balanced
Ch 5-6: TRS 25 K Ohms Balanced
Ch 5-6: RCA 12 K Ohms Unbalanced
Ch 7-8: 3.5 mm 30 K Ohms Unbalanced |
|
|
Output Connectors |
: |
Monitor outputs: one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo)
Headphone output: one 3.5 mm stereo jack |
|
Signal Indicators
Main Output LED Ladder |
: |
Limit: Red LED indicates limiter active condition
Signal: Green LED indicates signal present |
|
Signal Indicators: Ch 1-4 |
: |
Peak LED: Green = signal present, Red = input overload |
|
EQ |
: |
Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost |
|
System Limiter |
: |
On Board DSP Limiting and Tuning |
|
LF Driver |
: |
1 x JBL 328 H 250 mm (10 in) woofer |
|
HF Driver |
: |
1 x JBL 2414H-1 37.5 mm (1.5” ) annular polymer diaphragm, neodymium
compression driver |
|
Coverage Pattern |
: |
100º x 60º nominal |
|
Crossover Frequency |
: |
2 kHz |
|
Crossover Type |
: |
Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters |
|